diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index bcb4662..6c94794 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -33,6 +33,7 @@
 COBJS-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
 COBJS-$(CONFIG_USB_S3C64XX) += s3c64xx-hcd.o
 COBJS-$(CONFIG_USB_SL811HS) += sl811-hcd.o
+COBJS-$(CONFIG_USB_OHCI_S3C24XX) += ohci-s3c24xx.o
 
 # echi
 COBJS-$(CONFIG_USB_EHCI) += ehci-hcd.o
diff --git a/drivers/usb/host/ohci-s3c24xx.c b/drivers/usb/host/ohci-s3c24xx.c
new file mode 100644
index 0000000..03cd4c3
--- /dev/null
+++ b/drivers/usb/host/ohci-s3c24xx.c
@@ -0,0 +1,1801 @@
+/*
+ * URB OHCI HCD (Host Controller Driver) for USB on the S3C2400.
+ *
+ * (C) Copyright 2003
+ * Gary Jennejohn, DENX Software Engineering <garyj@denx.de>
+ *
+ * Note: Much of this code has been derived from Linux 2.4
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+/*
+ * IMPORTANT NOTES
+ * 1 - this driver is intended for use with USB Mass Storage Devices
+ *     (BBB) ONLY. There is NO support for Interrupt or Isochronous pipes!
+ */
+
+#include <common.h>
+/* #include <pci.h> no PCI on the S3C24X0 */
+
+#if defined(CONFIG_USB_OHCI) && defined(CONFIG_S3C24X0)
+
+#include <asm/arch/s3c24x0_cpu.h>
+#include <asm/io.h>
+#include <malloc.h>
+#include <usb.h>
+#include "ohci-s3c24xx.h"
+
+#define OHCI_USE_NPS		/* force NoPowerSwitching mode */
+#undef OHCI_VERBOSE_DEBUG	/* not always helpful */
+
+
+/* For initializing controller (mask in an HCFS mode too) */
+#define	OHCI_CONTROL_INIT \
+	(OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
+
+#define min_t(type, x, y) \
+	({ type __x = (x); type __y = (y); __x < __y ? __x : __y; })
+
+#undef DEBUG
+#ifdef DEBUG
+#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
+#else
+#define dbg(format, arg...) do {} while(0)
+#endif /* DEBUG */
+#define err(format, arg...) printf("ERROR: " format "\n", ## arg)
+#undef SHOW_INFO
+#ifdef SHOW_INFO
+#define info(format, arg...) printf("INFO: " format "\n", ## arg)
+#else
+#define info(format, arg...) do {} while(0)
+#endif
+
+#define m16_swap(x) swap_16(x)
+#define m32_swap(x) swap_32(x)
+
+/* global struct ohci */
+static struct ohci gohci;
+/* this must be aligned to a 256 byte boundary */
+struct ohci_hcca ghcca[1];
+/* a pointer to the aligned storage */
+struct ohci_hcca *phcca;
+/* this allocates EDs for all possible endpoints */
+struct ohci_device ohci_dev;
+/* urb_priv */
+struct urb_priv urb_priv;
+/* RHSC flag */
+int got_rhsc;
+/* device which was disconnected */
+struct usb_device *devgone;
+/* flag guarding URB transation */
+int urb_finished = 0;
+
+/*-------------------------------------------------------------------------*/
+
+/* AMD-756 (D2 rev) reports corrupt register contents in some cases.
+ * The erratum (#4) description is incorrect.  AMD's workaround waits
+ * till some bits (mostly reserved) are clear; ok for all revs.
+ */
+#define OHCI_QUIRK_AMD756 0xabcd
+#define read_roothub(hc, register, mask) ({ \
+	u32 temp = readl (&hc->regs->roothub.register); \
+	if (hc->flags & OHCI_QUIRK_AMD756) \
+		while (temp & mask) \
+			temp = readl (&hc->regs->roothub.register); \
+	temp; })
+
+static u32 roothub_a(struct ohci *hc)
+{
+	return read_roothub(hc, a, 0xfc0fe000);
+}
+static inline u32 roothub_b(struct ohci *hc)
+{
+	return readl(&hc->regs->roothub.b);
+}
+static inline u32 roothub_status(struct ohci *hc)
+{
+	return readl(&hc->regs->roothub.status);
+}
+static u32 roothub_portstatus(struct ohci *hc, int i)
+{
+	return read_roothub(hc, portstatus[i], 0xffe0fce0);
+}
+
+/* forward declaration */
+static int hc_interrupt(void);
+static void td_submit_job(struct usb_device *dev, unsigned long pipe,
+			  void *buffer, int transfer_len,
+			  struct devrequest *setup, struct urb_priv *urb,
+			  int interval);
+
+/*-------------------------------------------------------------------------*
+ * URB support functions
+ *-------------------------------------------------------------------------*/
+
+/* free HCD-private data associated with this URB */
+
+static void urb_free_priv(struct urb_priv *urb)
+{
+	int i;
+	int last;
+	struct td *td;
+
+	last = urb->length - 1;
+	if (last >= 0) {
+		for (i = 0; i <= last; i++) {
+			td = urb->td[i];
+			if (td) {
+				td->usb_dev = NULL;
+				urb->td[i] = NULL;
+			}
+		}
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef DEBUG
+static int sohci_get_current_frame_number(struct usb_device *dev);
+
+/* debug| print the main components of an URB
+ * small: 0) header + data packets 1) just header */
+
+static void pkt_print(struct usb_device *dev, unsigned long pipe, void *buffer,
+		      int transfer_len, struct devrequest *setup, char *str,
+		      int small)
+{
+	struct urb_priv *purb = &urb_priv;
+
+	dbg("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d/%d stat:%#lx",
+	    str,
+	    sohci_get_current_frame_number(dev),
+	    usb_pipedevice(pipe),
+	    usb_pipeendpoint(pipe),
+	    usb_pipeout(pipe) ? 'O' : 'I',
+	    usb_pipetype(pipe) < 2 ?
+		(usb_pipeint(pipe) ? "INTR" : "ISOC") :
+		(usb_pipecontrol(pipe) ? "CTRL" : "BULK"),
+	    purb->actual_length, transfer_len, dev->status);
+#ifdef	OHCI_VERBOSE_DEBUG
+	if (!small) {
+		int i, len;
+
+		if (usb_pipecontrol(pipe)) {
+			printf(__FILE__ ": cmd(8):");
+			for (i = 0; i < 8; i++)
+				printf(" %02x", ((__u8 *) setup)[i]);
+			printf("\n");
+		}
+		if (transfer_len > 0 && buffer) {
+			printf(__FILE__ ": data(%d/%d):",
+			       purb->actual_length, transfer_len);
+			len = usb_pipeout(pipe) ?
+			    transfer_len : purb->actual_length;
+			for (i = 0; i < 16 && i < len; i++)
+				printf(" %02x", ((__u8 *) buffer)[i]);
+			printf("%s\n", i < len ? "..." : "");
+		}
+	}
+#endif
+}
+
+/* just for debugging; prints non-empty branches of the
+   int ed tree inclusive iso eds*/
+void ep_print_int_eds(struct ohci *ohci, char *str)
+{
+	int i, j;
+	__u32 *ed_p;
+	for (i = 0; i < 32; i++) {
+		j = 5;
+		ed_p = &(ohci->hcca->int_table[i]);
+		if (*ed_p == 0)
+			continue;
+		printf(__FILE__ ": %s branch int %2d(%2x):", str, i, i);
+		while (*ed_p != 0 && j--) {
+			struct ed *ed = (struct ed *) m32_swap(ed_p);
+			printf(" ed: %4x;", ed->hwINFO);
+			ed_p = &ed->hwNextED;
+		}
+		printf("\n");
+	}
+}
+
+static void ohci_dump_intr_mask(char *label, __u32 mask)
+{
+	dbg("%s: 0x%08x%s%s%s%s%s%s%s%s%s",
+	    label,
+	    mask,
+	    (mask & OHCI_INTR_MIE) ? " MIE" : "",
+	    (mask & OHCI_INTR_OC) ? " OC" : "",
+	    (mask & OHCI_INTR_RHSC) ? " RHSC" : "",
+	    (mask & OHCI_INTR_FNO) ? " FNO" : "",
+	    (mask & OHCI_INTR_UE) ? " UE" : "",
+	    (mask & OHCI_INTR_RD) ? " RD" : "",
+	    (mask & OHCI_INTR_SF) ? " SF" : "",
+	    (mask & OHCI_INTR_WDH) ? " WDH" : "",
+	    (mask & OHCI_INTR_SO) ? " SO" : "");
+}
+
+static void maybe_print_eds(char *label, __u32 value)
+{
+	struct ed *edp = (struct ed *) value;
+
+	if (value) {
+		dbg("%s %08x", label, value);
+		dbg("%08x", edp->hwINFO);
+		dbg("%08x", edp->hwTailP);
+		dbg("%08x", edp->hwHeadP);
+		dbg("%08x", edp->hwNextED);
+	}
+}
+
+static char *hcfs2string(int state)
+{
+	switch (state) {
+	case OHCI_USB_RESET:
+		return "reset";
+	case OHCI_USB_RESUME:
+		return "resume";
+	case OHCI_USB_OPER:
+		return "operational";
+	case OHCI_USB_SUSPEND:
+		return "suspend";
+	}
+	return "?";
+}
+
+/* dump control and status registers */
+static void ohci_dump_status(struct ohci *controller)
+{
+	struct ohci_regs *regs = controller->regs;
+	__u32 temp;
+
+	temp = readl(&regs->revision) & 0xff;
+	if (temp != 0x10)
+		dbg("spec %d.%d", (temp >> 4), (temp & 0x0f));
+
+	temp = readl(&regs->control);
+	dbg("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
+	    (temp & OHCI_CTRL_RWE) ? " RWE" : "",
+	    (temp & OHCI_CTRL_RWC) ? " RWC" : "",
+	    (temp & OHCI_CTRL_IR) ? " IR" : "",
+	    hcfs2string(temp & OHCI_CTRL_HCFS),
+	    (temp & OHCI_CTRL_BLE) ? " BLE" : "",
+	    (temp & OHCI_CTRL_CLE) ? " CLE" : "",
+	    (temp & OHCI_CTRL_IE) ? " IE" : "",
+	    (temp & OHCI_CTRL_PLE) ? " PLE" : "", temp & OHCI_CTRL_CBSR);
+
+	temp = readl(&regs->cmdstatus);
+	dbg("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
+	    (temp & OHCI_SOC) >> 16,
+	    (temp & OHCI_OCR) ? " OCR" : "",
+	    (temp & OHCI_BLF) ? " BLF" : "",
+	    (temp & OHCI_CLF) ? " CLF" : "", (temp & OHCI_HCR) ? " HCR" : "");
+
+	ohci_dump_intr_mask("intrstatus", readl(&regs->intrstatus));
+	ohci_dump_intr_mask("intrenable", readl(&regs->intrenable));
+
+	maybe_print_eds("ed_periodcurrent", readl(&regs->ed_periodcurrent));
+
+	maybe_print_eds("ed_controlhead", readl(&regs->ed_controlhead));
+	maybe_print_eds("ed_controlcurrent", readl(&regs->ed_controlcurrent));
+
+	maybe_print_eds("ed_bulkhead", readl(&regs->ed_bulkhead));
+	maybe_print_eds("ed_bulkcurrent", readl(&regs->ed_bulkcurrent));
+
+	maybe_print_eds("donehead", readl(&regs->donehead));
+}
+
+static void ohci_dump_roothub(struct ohci *controller, int verbose)
+{
+	__u32 temp, ndp, i;
+
+	temp = roothub_a(controller);
+	ndp = (temp & RH_A_NDP);
+
+	if (verbose) {
+		dbg("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp,
+		    ((temp & RH_A_POTPGT) >> 24) & 0xff,
+		    (temp & RH_A_NOCP) ? " NOCP" : "",
+		    (temp & RH_A_OCPM) ? " OCPM" : "",
+		    (temp & RH_A_DT) ? " DT" : "",
+		    (temp & RH_A_NPS) ? " NPS" : "",
+		    (temp & RH_A_PSM) ? " PSM" : "", ndp);
+		temp = roothub_b(controller);
+		dbg("roothub.b: %08x PPCM=%04x DR=%04x",
+		    temp, (temp & RH_B_PPCM) >> 16, (temp & RH_B_DR)
+		    );
+		temp = roothub_status(controller);
+		dbg("roothub.status: %08x%s%s%s%s%s%s",
+		    temp,
+		    (temp & RH_HS_CRWE) ? " CRWE" : "",
+		    (temp & RH_HS_OCIC) ? " OCIC" : "",
+		    (temp & RH_HS_LPSC) ? " LPSC" : "",
+		    (temp & RH_HS_DRWE) ? " DRWE" : "",
+		    (temp & RH_HS_OCI) ? " OCI" : "",
+		    (temp & RH_HS_LPS) ? " LPS" : "");
+	}
+
+	for (i = 0; i < ndp; i++) {
+		temp = roothub_portstatus(controller, i);
+		dbg("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s",
+		    i,
+		    temp,
+		    (temp & RH_PS_PRSC) ? " PRSC" : "",
+		    (temp & RH_PS_OCIC) ? " OCIC" : "",
+		    (temp & RH_PS_PSSC) ? " PSSC" : "",
+		    (temp & RH_PS_PESC) ? " PESC" : "",
+		    (temp & RH_PS_CSC) ? " CSC" : "",
+		    (temp & RH_PS_LSDA) ? " LSDA" : "",
+		    (temp & RH_PS_PPS) ? " PPS" : "",
+		    (temp & RH_PS_PRS) ? " PRS" : "",
+		    (temp & RH_PS_POCI) ? " POCI" : "",
+		    (temp & RH_PS_PSS) ? " PSS" : "",
+		    (temp & RH_PS_PES) ? " PES" : "",
+		    (temp & RH_PS_CCS) ? " CCS" : "");
+	}
+}
+
+static void ohci_dump(struct ohci *controller, int verbose)
+{
+	dbg("OHCI controller usb-%s state", controller->slot_name);
+
+	/* dumps some of the state we know about */
+	ohci_dump_status(controller);
+	if (verbose)
+		ep_print_int_eds(controller, "hcca");
+	dbg("hcca frame #%04x", controller->hcca->frame_no);
+	ohci_dump_roothub(controller, 1);
+}
+
+#endif /* DEBUG */
+
+/*-------------------------------------------------------------------------*
+ * Interface functions (URB)
+ *-------------------------------------------------------------------------*/
+
+/* get a transfer request */
+
+int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer,
+		     int transfer_len, struct devrequest *setup, int interval)
+{
+	struct ohci *ohci;
+	struct ed *ed;
+	struct urb_priv *purb_priv;
+	int i, size = 0;
+
+	ohci = &gohci;
+
+	/* when controller's hung, permit only roothub cleanup attempts
+	 * such as powering down ports */
+	if (ohci->disabled) {
+		err("sohci_submit_job: EPIPE");
+		return -1;
+	}
+
+	/* if we have an unfinished URB from previous transaction let's
+	 * fail and scream as quickly as possible so as not to corrupt
+	 * further communication */
+	if (!urb_finished) {
+		err("sohci_submit_job: URB NOT FINISHED");
+		return -1;
+	}
+	/* we're about to begin a new transaction here
+	   so mark the URB unfinished */
+	urb_finished = 0;
+
+	/* every endpoint has a ed, locate and fill it */
+	ed = ep_add_ed(dev, pipe);
+	if (!ed) {
+		err("sohci_submit_job: ENOMEM");
+		return -1;
+	}
+
+	/* for the private part of the URB we need the number of TDs (size) */
+	switch (usb_pipetype(pipe)) {
+	case PIPE_BULK:
+		/* one TD for every 4096 Byte */
+		size = (transfer_len - 1) / 4096 + 1;
+		break;
+	case PIPE_CONTROL:
+		/* 1 TD for setup, 1 for ACK and 1 for every 4096 B */
+		size = (transfer_len == 0) ? 2 : (transfer_len - 1) / 4096 + 3;
+		break;
+	}
+
+	if (size >= (N_URB_TD - 1)) {
+		err("need %d TDs, only have %d", size, N_URB_TD);
+		return -1;
+	}
+	purb_priv = &urb_priv;
+	purb_priv->pipe = pipe;
+
+	/* fill the private part of the URB */
+	purb_priv->length = size;
+	purb_priv->ed = ed;
+	purb_priv->actual_length = 0;
+
+	/* allocate the TDs */
+	/* note that td[0] was allocated in ep_add_ed */
+	for (i = 0; i < size; i++) {
+		purb_priv->td[i] = td_alloc(dev);
+		if (!purb_priv->td[i]) {
+			purb_priv->length = i;
+			urb_free_priv(purb_priv);
+			err("sohci_submit_job: ENOMEM");
+			return -1;
+		}
+	}
+
+	if (ed->state == ED_NEW || (ed->state & ED_DEL)) {
+		urb_free_priv(purb_priv);
+		err("sohci_submit_job: EINVAL");
+		return -1;
+	}
+
+	/* link the ed into a chain if is not already */
+	if (ed->state != ED_OPER)
+		ep_link(ohci, ed);
+
+	/* fill the TDs and link it to the ed */
+	td_submit_job(dev, pipe, buffer, transfer_len, setup, purb_priv,
+		      interval);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef DEBUG
+/* tell us the current USB frame number */
+
+static int sohci_get_current_frame_number(struct usb_device *usb_dev)
+{
+	struct ohci *ohci = &gohci;
+
+	return m16_swap(ohci->hcca->frame_no);
+}
+#endif
+
+/*-------------------------------------------------------------------------*
+ * ED handling functions
+ *-------------------------------------------------------------------------*/
+
+/* link an ed into one of the HC chains */
+
+static int ep_link(struct ohci *ohci, struct ed *edi)
+{
+	struct ed *ed = edi;
+
+	ed->state = ED_OPER;
+
+	switch (ed->type) {
+	case PIPE_CONTROL:
+		ed->hwNextED = 0;
+		if (ohci->ed_controltail == NULL) {
+			writel((u32)ed, &ohci->regs->ed_controlhead);
+		} else {
+			ohci->ed_controltail->hwNextED = (__u32) m32_swap(ed);
+		}
+		ed->ed_prev = ohci->ed_controltail;
+		if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
+		    !ohci->ed_rm_list[1] && !ohci->sleeping) {
+			ohci->hc_control |= OHCI_CTRL_CLE;
+			writel(ohci->hc_control, &ohci->regs->control);
+		}
+		ohci->ed_controltail = edi;
+		break;
+
+	case PIPE_BULK:
+		ed->hwNextED = 0;
+		if (ohci->ed_bulktail == NULL) {
+			writel((u32)ed, &ohci->regs->ed_bulkhead);
+		} else {
+			ohci->ed_bulktail->hwNextED = (__u32) m32_swap(ed);
+		}
+		ed->ed_prev = ohci->ed_bulktail;
+		if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
+		    !ohci->ed_rm_list[1] && !ohci->sleeping) {
+			ohci->hc_control |= OHCI_CTRL_BLE;
+			writel(ohci->hc_control, &ohci->regs->control);
+		}
+		ohci->ed_bulktail = edi;
+		break;
+	}
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* unlink an ed from one of the HC chains.
+ * just the link to the ed is unlinked.
+ * the link from the ed still points to another operational ed or 0
+ * so the HC can eventually finish the processing of the unlinked ed */
+
+static int ep_unlink(struct ohci *ohci, struct ed *ed)
+{
+	struct ed *next;
+	ed->hwINFO |= m32_swap(OHCI_ED_SKIP);
+
+	switch (ed->type) {
+	case PIPE_CONTROL:
+		if (ed->ed_prev == NULL) {
+			if (!ed->hwNextED) {
+				ohci->hc_control &= ~OHCI_CTRL_CLE;
+				writel(ohci->hc_control, &ohci->regs->control);
+			}
+			writel(m32_swap(*((__u32 *) &ed->hwNextED)),
+			       &ohci->regs->ed_controlhead);
+		} else {
+			ed->ed_prev->hwNextED = ed->hwNextED;
+		}
+		if (ohci->ed_controltail == ed) {
+			ohci->ed_controltail = ed->ed_prev;
+		} else {
+			next = (struct ed *)m32_swap(*((__u32 *)&ed->hwNextED));
+			next->ed_prev = ed->ed_prev;
+		}
+		break;
+
+	case PIPE_BULK:
+		if (ed->ed_prev == NULL) {
+			if (!ed->hwNextED) {
+				ohci->hc_control &= ~OHCI_CTRL_BLE;
+				writel(ohci->hc_control, &ohci->regs->control);
+			}
+			writel(m32_swap(*((__u32 *) &ed->hwNextED)),
+			       &ohci->regs->ed_bulkhead);
+		} else {
+			ed->ed_prev->hwNextED = ed->hwNextED;
+		}
+		if (ohci->ed_bulktail == ed) {
+			ohci->ed_bulktail = ed->ed_prev;
+		} else {
+			next = (struct ed *)m32_swap(*((__u32 *)&ed->hwNextED));
+			next->ed_prev = ed->ed_prev;
+		}
+		break;
+	}
+	ed->state = ED_UNLINK;
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* add/reinit an endpoint; this should be done once at the usb_set_configuration
+ * command, but the USB stack is a little bit stateless  so we do it at every
+ * transaction. If the state of the ed is ED_NEW then a dummy td is added and
+ * the state is changed to ED_UNLINK. In all other cases the state is left
+ * unchanged. The ed info fields are setted anyway even though most of them
+ * should not change */
+
+static struct ed *ep_add_ed(struct usb_device *usb_dev, unsigned long pipe)
+{
+	struct td *td;
+	struct ed *ed_ret;
+	struct ed *ed;
+
+	ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint(pipe) << 1) |
+				   (usb_pipecontrol(pipe) ? 0 :
+				    usb_pipeout(pipe))];
+
+	if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) {
+		err("ep_add_ed: pending delete");
+		/* pending delete request */
+		return NULL;
+	}
+
+	if (ed->state == ED_NEW) {
+		ed->hwINFO = m32_swap(OHCI_ED_SKIP);	/* skip ed */
+		/* dummy td; end of td list for ed */
+		td = td_alloc(usb_dev);
+		ed->hwTailP = (__u32) m32_swap(td);
+		ed->hwHeadP = ed->hwTailP;
+		ed->state = ED_UNLINK;
+		ed->type = usb_pipetype(pipe);
+		ohci_dev.ed_cnt++;
+	}
+
+	ed->hwINFO = m32_swap(usb_pipedevice(pipe)
+			      | usb_pipeendpoint(pipe) << 7
+			      | (usb_pipeisoc(pipe) ? 0x8000 : 0)
+			      | (usb_pipecontrol(pipe) ? 0 :
+				 (usb_pipeout(pipe) ? 0x800 : 0x1000))
+			      | usb_pipeslow(pipe) << 13 |
+			      usb_maxpacket(usb_dev, pipe) << 16);
+
+	return ed_ret;
+}
+
+/*-------------------------------------------------------------------------*
+ * TD handling functions
+ *-------------------------------------------------------------------------*/
+
+/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
+
+static void td_fill(struct ohci *ohci, unsigned int info, void *data, int len,
+		    struct usb_device *dev, int index,
+		    struct urb_priv *urb_priv)
+{
+	struct td *td, *td_pt;
+#ifdef OHCI_FILL_TRACE
+	int i;
+#endif
+
+	if (index > urb_priv->length) {
+		err("index > length");
+		return;
+	}
+	/* use this td as the next dummy */
+	td_pt = urb_priv->td[index];
+	td_pt->hwNextTD = 0;
+
+	/* fill the old dummy TD */
+	td = urb_priv->td[index] =
+	    (struct td *) (m32_swap(urb_priv->ed->hwTailP) & ~0xf);
+
+	td->ed = urb_priv->ed;
+	td->next_dl_td = NULL;
+	td->index = index;
+	td->data = (__u32) data;
+#ifdef OHCI_FILL_TRACE
+	if (usb_pipebulk(urb_priv->pipe) && usb_pipeout(urb_priv->pipe)) {
+		for (i = 0; i < len; i++)
+			printf("td->data[%d] %#2x ", i,
+			       ((unsigned char *)td->data)[i]);
+		printf("\n");
+	}
+#endif
+	if (!len)
+		data = 0;
+
+	td->hwINFO = (__u32) m32_swap(info);
+	td->hwCBP = (__u32) m32_swap(data);
+	if (data)
+		td->hwBE = (__u32) m32_swap(data + len - 1);
+	else
+		td->hwBE = 0;
+	td->hwNextTD = (__u32) m32_swap(td_pt);
+
+	/* append to queue */
+	td->ed->hwTailP = td->hwNextTD;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* prepare all TDs of a transfer */
+
+static void td_submit_job(struct usb_device *dev, unsigned long pipe,
+			  void *buffer, int transfer_len,
+			  struct devrequest *setup, struct urb_priv *urb,
+			  int interval)
+{
+	struct ohci *ohci = &gohci;
+	int data_len = transfer_len;
+	void *data;
+	int cnt = 0;
+	__u32 info = 0;
+	unsigned int toggle = 0;
+
+	/* OHCI handles the DATA-toggles itself, we just
+	   use the USB-toggle bits for reseting */
+	if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
+		toggle = TD_T_TOGGLE;
+	} else {
+		toggle = TD_T_DATA0;
+		usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe),
+			      1);
+	}
+	urb->td_cnt = 0;
+	if (data_len)
+		data = buffer;
+	else
+		data = 0;
+
+	switch (usb_pipetype(pipe)) {
+	case PIPE_BULK:
+		info = usb_pipeout(pipe) ? TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN;
+		while (data_len > 4096) {
+			td_fill(ohci, info | (cnt ? TD_T_TOGGLE : toggle), data,
+				4096, dev, cnt, urb);
+			data += 4096;
+			data_len -= 4096;
+			cnt++;
+		}
+		info = usb_pipeout(pipe) ?
+				TD_CC | TD_DP_OUT :
+				TD_CC | TD_R | TD_DP_IN;
+		td_fill(ohci, info | (cnt ? TD_T_TOGGLE : toggle), data,
+			data_len, dev, cnt, urb);
+		cnt++;
+
+		if (!ohci->sleeping)
+			/* start bulk list */
+			writel(OHCI_BLF, &ohci->regs->cmdstatus);
+		break;
+
+	case PIPE_CONTROL:
+		info = TD_CC | TD_DP_SETUP | TD_T_DATA0;
+		td_fill(ohci, info, setup, 8, dev, cnt++, urb);
+		if (data_len > 0) {
+			info = usb_pipeout(pipe) ?
+			    TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 :
+			    TD_CC | TD_R | TD_DP_IN | TD_T_DATA1;
+			/* NOTE:  mishandles transfers >8K, some >4K */
+			td_fill(ohci, info, data, data_len, dev, cnt++, urb);
+		}
+		info = usb_pipeout(pipe) ?
+		    TD_CC | TD_DP_IN | TD_T_DATA1 :
+		    TD_CC | TD_DP_OUT | TD_T_DATA1;
+		td_fill(ohci, info, data, 0, dev, cnt++, urb);
+		if (!ohci->sleeping)
+			/* start Control list */
+			writel(OHCI_CLF, &ohci->regs->cmdstatus);
+		break;
+	}
+	if (urb->length != cnt)
+		dbg("TD LENGTH %d != CNT %d", urb->length, cnt);
+}
+
+/*-------------------------------------------------------------------------*
+ * Done List handling functions
+ *-------------------------------------------------------------------------*/
+
+
+/* calculate the transfer length and update the urb */
+
+static void dl_transfer_length(struct td *td)
+{
+	__u32 tdBE, tdCBP;
+	struct urb_priv *lurb_priv = &urb_priv;
+
+	tdBE = m32_swap(td->hwBE);
+	tdCBP = m32_swap(td->hwCBP);
+
+	if (!(usb_pipecontrol(lurb_priv->pipe) &&
+	      ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
+		if (tdBE != 0) {
+			if (td->hwCBP == 0)
+				lurb_priv->actual_length += tdBE - td->data + 1;
+			else
+				lurb_priv->actual_length += tdCBP - td->data;
+		}
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* replies to the request have to be on a FIFO basis so
+ * we reverse the reversed done-list */
+
+static struct td *dl_reverse_done_list(struct ohci *ohci)
+{
+	__u32 td_list_hc;
+	__u32 tmp;
+	struct td *td_rev = NULL;
+	struct td *td_list = NULL;
+	struct urb_priv *lurb_priv = NULL;
+
+	td_list_hc = m32_swap(ohci->hcca->done_head) & 0xfffffff0;
+	ohci->hcca->done_head = 0;
+
+	while (td_list_hc) {
+		td_list = (struct td *) td_list_hc;
+
+		if (TD_CC_GET(m32_swap(td_list->hwINFO))) {
+			lurb_priv = &urb_priv;
+			dbg(" USB-error/status: %x : %p",
+			    TD_CC_GET(m32_swap(td_list->hwINFO)), td_list);
+			if (td_list->ed->hwHeadP & m32_swap(0x1)) {
+				if (lurb_priv &&
+				    ((td_list->index+1) < lurb_priv->length)) {
+					tmp = lurb_priv->length - 1;
+					td_list->ed->hwHeadP =
+						(lurb_priv->td[tmp]->hwNextTD &
+						 m32_swap(0xfffffff0)) |
+						 (td_list->ed->hwHeadP &
+						  m32_swap(0x2));
+					lurb_priv->td_cnt += lurb_priv->length -
+							     td_list->index - 1;
+				} else
+					td_list->ed->hwHeadP &=
+					    m32_swap(0xfffffff2);
+			}
+		}
+
+		td_list->next_dl_td = td_rev;
+		td_rev = td_list;
+		td_list_hc = m32_swap(td_list->hwNextTD) & 0xfffffff0;
+	}
+
+	return td_list;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* td done list */
+static int dl_done_list(struct ohci *ohci, struct td *td_list)
+{
+	struct td *td_list_next = NULL;
+	struct ed *ed;
+	int cc = 0;
+	int stat = 0;
+	/* urb_t *urb; */
+	struct urb_priv *lurb_priv;
+	__u32 tdINFO, edHeadP, edTailP;
+
+	while (td_list) {
+		td_list_next = td_list->next_dl_td;
+
+		lurb_priv = &urb_priv;
+		tdINFO = m32_swap(td_list->hwINFO);
+
+		ed = td_list->ed;
+
+		dl_transfer_length(td_list);
+
+		/* error code of transfer */
+		cc = TD_CC_GET(tdINFO);
+		if (cc != 0) {
+			dbg("ConditionCode %#x", cc);
+			stat = cc_to_error[cc];
+		}
+
+		/* see if this done list makes for all TD's of current URB,
+		 * and mark the URB finished if so */
+		if (++(lurb_priv->td_cnt) == lurb_priv->length) {
+			if ((ed->state & (ED_OPER | ED_UNLINK)))
+				urb_finished = 1;
+			else
+				dbg("dl_done_list: strange.., ED state %x, "
+				    "ed->state\n");
+		} else
+			dbg("dl_done_list: processing TD %x, len %x\n",
+			    lurb_priv->td_cnt, lurb_priv->length);
+
+		if (ed->state != ED_NEW) {
+			edHeadP = m32_swap(ed->hwHeadP) & 0xfffffff0;
+			edTailP = m32_swap(ed->hwTailP);
+
+			/* unlink eds if they are not busy */
+			if ((edHeadP == edTailP) && (ed->state == ED_OPER))
+				ep_unlink(ohci, ed);
+		}
+
+		td_list = td_list_next;
+	}
+	return stat;
+}
+
+/*-------------------------------------------------------------------------*
+ * Virtual Root Hub
+ *-------------------------------------------------------------------------*/
+
+/* Device descriptor */
+static __u8 root_hub_dev_des[] = {
+	0x12,	/*  __u8  bLength; */
+	0x01,	/*  __u8  bDescriptorType; Device */
+	0x10,	/*  __u16 bcdUSB; v1.1 */
+	0x01,
+	0x09,	/*  __u8  bDeviceClass; HUB_CLASSCODE */
+	0x00,	/*  __u8  bDeviceSubClass; */
+	0x00,	/*  __u8  bDeviceProtocol; */
+	0x08,	/*  __u8  bMaxPacketSize0; 8 Bytes */
+	0x00,	/*  __u16 idVendor; */
+	0x00,
+	0x00,	/*  __u16 idProduct; */
+	0x00,
+	0x00,	/*  __u16 bcdDevice; */
+	0x00,
+	0x00,	/*  __u8  iManufacturer; */
+	0x01,	/*  __u8  iProduct; */
+	0x00,	/*  __u8  iSerialNumber; */
+	0x01	/*  __u8  bNumConfigurations; */
+};
+
+/* Configuration descriptor */
+static __u8 root_hub_config_des[] = {
+	0x09,	/*  __u8  bLength; */
+	0x02,	/*  __u8  bDescriptorType; Configuration */
+	0x19,	/*  __u16 wTotalLength; */
+	0x00,
+	0x01,	/*  __u8  bNumInterfaces; */
+	0x01,	/*  __u8  bConfigurationValue; */
+	0x00,	/*  __u8  iConfiguration; */
+	0x40,	/*  __u8  bmAttributes;
+		   Bit 7: Bus-powered, 6: Self-powered,
+		   5 Remote-wakwup, 4..0: resvd */
+	0x00,	/*  __u8  MaxPower; */
+
+	/* interface */
+	0x09,	/*  __u8  if_bLength; */
+	0x04,	/*  __u8  if_bDescriptorType; Interface */
+	0x00,	/*  __u8  if_bInterfaceNumber; */
+	0x00,	/*  __u8  if_bAlternateSetting; */
+	0x01,	/*  __u8  if_bNumEndpoints; */
+	0x09,	/*  __u8  if_bInterfaceClass; HUB_CLASSCODE */
+	0x00,	/*  __u8  if_bInterfaceSubClass; */
+	0x00,	/*  __u8  if_bInterfaceProtocol; */
+	0x00,	/*  __u8  if_iInterface; */
+
+	/* endpoint */
+	0x07,	/*  __u8  ep_bLength; */
+	0x05,	/*  __u8  ep_bDescriptorType; Endpoint */
+	0x81,	/*  __u8  ep_bEndpointAddress; IN Endpoint 1 */
+	0x03,	/*  __u8  ep_bmAttributes; Interrupt */
+	0x02,	/*  __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
+	0x00,
+	0xff	/*  __u8  ep_bInterval; 255 ms */
+};
+
+static unsigned char root_hub_str_index0[] = {
+	0x04,	/*  __u8  bLength; */
+	0x03,	/*  __u8  bDescriptorType; String-descriptor */
+	0x09,	/*  __u8  lang ID */
+	0x04,	/*  __u8  lang ID */
+};
+
+static unsigned char root_hub_str_index1[] = {
+	28,	/*  __u8  bLength; */
+	0x03,	/*  __u8  bDescriptorType; String-descriptor */
+	'O',	/*  __u8  Unicode */
+	0,	/*  __u8  Unicode */
+	'H',	/*  __u8  Unicode */
+	0,	/*  __u8  Unicode */
+	'C',	/*  __u8  Unicode */
+	0,	/*  __u8  Unicode */
+	'I',	/*  __u8  Unicode */
+	0,	/*  __u8  Unicode */
+	' ',	/*  __u8  Unicode */
+	0,	/*  __u8  Unicode */
+	'R',	/*  __u8  Unicode */
+	0,	/*  __u8  Unicode */
+	'o',	/*  __u8  Unicode */
+	0,	/*  __u8  Unicode */
+	'o',	/*  __u8  Unicode */
+	0,	/*  __u8  Unicode */
+	't',	/*  __u8  Unicode */
+	0,	/*  __u8  Unicode */
+	' ',	/*  __u8  Unicode */
+	0,	/*  __u8  Unicode */
+	'H',	/*  __u8  Unicode */
+	0,	/*  __u8  Unicode */
+	'u',	/*  __u8  Unicode */
+	0,	/*  __u8  Unicode */
+	'b',	/*  __u8  Unicode */
+	0,	/*  __u8  Unicode */
+};
+
+/* Hub class-specific descriptor is constructed dynamically */
+
+
+/*-------------------------------------------------------------------------*/
+
+#define OK(x)			len = (x); break
+#ifdef DEBUG
+#define WR_RH_STAT(x) \
+{ \
+	info("WR:status %#8x", (x)); \
+	writel((x), &gohci.regs->roothub.status); \
+}
+#define WR_RH_PORTSTAT(x) \
+{ \
+	info("WR:portstatus[%d] %#8x", wIndex-1, (x)); \
+	writel((x), &gohci.regs->roothub.portstatus[wIndex-1]); \
+}
+#else
+#define WR_RH_STAT(x) \
+	writel((x), &gohci.regs->roothub.status)
+#define WR_RH_PORTSTAT(x)\
+	writel((x), &gohci.regs->roothub.portstatus[wIndex-1])
+#endif
+#define RD_RH_STAT	roothub_status(&gohci)
+#define RD_RH_PORTSTAT	roothub_portstatus(&gohci, wIndex-1)
+
+/* request to virtual root hub */
+
+int rh_check_port_status(struct ohci *controller)
+{
+	__u32 temp, ndp, i;
+	int res;
+
+	res = -1;
+	temp = roothub_a(controller);
+	ndp = (temp & RH_A_NDP);
+	for (i = 0; i < ndp; i++) {
+		temp = roothub_portstatus(controller, i);
+		/* check for a device disconnect */
+		if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
+		     (RH_PS_PESC | RH_PS_CSC)) && ((temp & RH_PS_CCS) == 0)) {
+			res = i;
+			break;
+		}
+	}
+	return res;
+}
+
+static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
+			      void *buffer, int transfer_len,
+			      struct devrequest *cmd)
+{
+	void *data = buffer;
+	int leni = transfer_len;
+	int len = 0;
+	int stat = 0;
+	union {
+		__u32 word[4];
+		__u16 hword[8];
+		__u8 byte[16];
+	} datab;
+	__u8 *data_buf = datab.byte;
+	__u16 bmRType_bReq;
+	__u16 wValue;
+	__u16 wIndex;
+	__u16 wLength;
+
+#ifdef DEBUG
+	urb_priv.actual_length = 0;
+	pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)",
+		  usb_pipein(pipe));
+#else
+	mdelay(1);
+#endif
+	if (usb_pipeint(pipe)) {
+		info("Root-Hub submit IRQ: NOT implemented");
+		return 0;
+	}
+
+	bmRType_bReq = cmd->requesttype | (cmd->request << 8);
+	wValue = m16_swap(cmd->value);
+	wIndex = m16_swap(cmd->index);
+	wLength = m16_swap(cmd->length);
+
+	info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x",
+	     dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);
+
+	switch (bmRType_bReq) {
+		/* Request Destination:
+		   without flags: Device,
+		   RH_INTERFACE: interface,
+		   RH_ENDPOINT: endpoint,
+		   RH_CLASS means HUB here,
+		   RH_OTHER | RH_CLASS  almost ever means HUB_PORT here
+		 */
+
+	case RH_GET_STATUS:
+		datab.hword[0] = m16_swap(1);
+		OK(2);
+	case RH_GET_STATUS | RH_INTERFACE:
+		datab.hword[0] = m16_swap(0);
+		OK(2);
+	case RH_GET_STATUS | RH_ENDPOINT:
+		datab.hword[0] = m16_swap(0);
+		OK(2);
+	case RH_GET_STATUS | RH_CLASS:
+		datab.word[0] =
+		    m32_swap(RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE));
+		OK(4);
+	case RH_GET_STATUS | RH_OTHER | RH_CLASS:
+		datab.word[0] = m32_swap(RD_RH_PORTSTAT);
+		OK(4);
+
+	case RH_CLEAR_FEATURE | RH_ENDPOINT:
+		switch (wValue) {
+		case (RH_ENDPOINT_STALL):
+			OK(0);
+		}
+		break;
+
+	case RH_CLEAR_FEATURE | RH_CLASS:
+		switch (wValue) {
+		case RH_C_HUB_LOCAL_POWER:
+			OK(0);
+		case (RH_C_HUB_OVER_CURRENT):
+			WR_RH_STAT(RH_HS_OCIC);
+			OK(0);
+		}
+		break;
+
+	case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
+		switch (wValue) {
+		case (RH_PORT_ENABLE):
+			WR_RH_PORTSTAT(RH_PS_CCS);
+			OK(0);
+		case (RH_PORT_SUSPEND):
+			WR_RH_PORTSTAT(RH_PS_POCI);
+			OK(0);
+		case (RH_PORT_POWER):
+			WR_RH_PORTSTAT(RH_PS_LSDA);
+			OK(0);
+		case (RH_C_PORT_CONNECTION):
+			WR_RH_PORTSTAT(RH_PS_CSC);
+			OK(0);
+		case (RH_C_PORT_ENABLE):
+			WR_RH_PORTSTAT(RH_PS_PESC);
+			OK(0);
+		case (RH_C_PORT_SUSPEND):
+			WR_RH_PORTSTAT(RH_PS_PSSC);
+			OK(0);
+		case (RH_C_PORT_OVER_CURRENT):
+			WR_RH_PORTSTAT(RH_PS_OCIC);
+			OK(0);
+		case (RH_C_PORT_RESET):
+			WR_RH_PORTSTAT(RH_PS_PRSC);
+			OK(0);
+		}
+		break;
+
+	case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
+		switch (wValue) {
+		case (RH_PORT_SUSPEND):
+			WR_RH_PORTSTAT(RH_PS_PSS);
+			OK(0);
+		case (RH_PORT_RESET):	/* BUG IN HUP CODE ******** */
+			if (RD_RH_PORTSTAT & RH_PS_CCS)
+				WR_RH_PORTSTAT(RH_PS_PRS);
+			OK(0);
+		case (RH_PORT_POWER):
+			WR_RH_PORTSTAT(RH_PS_PPS);
+			OK(0);
+		case (RH_PORT_ENABLE):	/* BUG IN HUP CODE ******** */
+			if (RD_RH_PORTSTAT & RH_PS_CCS)
+				WR_RH_PORTSTAT(RH_PS_PES);
+			OK(0);
+		}
+		break;
+
+	case RH_SET_ADDRESS:
+		gohci.rh.devnum = wValue;
+		OK(0);
+
+	case RH_GET_DESCRIPTOR:
+		switch ((wValue & 0xff00) >> 8) {
+		case (0x01):	/* device descriptor */
+			len = min_t(unsigned int,
+				    leni,
+				    min_t(unsigned int,
+					  sizeof(root_hub_dev_des), wLength));
+			data_buf = root_hub_dev_des;
+			OK(len);
+		case (0x02):	/* configuration descriptor */
+			len = min_t(unsigned int,
+				    leni,
+				    min_t(unsigned int,
+					  sizeof(root_hub_config_des),
+					  wLength));
+			data_buf = root_hub_config_des;
+			OK(len);
+		case (0x03):	/* string descriptors */
+			if (wValue == 0x0300) {
+				len = min_t(unsigned int,
+					    leni,
+					    min_t(unsigned int,
+						  sizeof(root_hub_str_index0),
+						  wLength));
+				data_buf = root_hub_str_index0;
+				OK(len);
+			}
+			if (wValue == 0x0301) {
+				len = min_t(unsigned int,
+					    leni,
+					    min_t(unsigned int,
+						  sizeof(root_hub_str_index1),
+						  wLength));
+				data_buf = root_hub_str_index1;
+				OK(len);
+			}
+		default:
+			stat = USB_ST_STALLED;
+		}
+		break;
+
+	case RH_GET_DESCRIPTOR | RH_CLASS:
+		{
+			__u32 temp = roothub_a(&gohci);
+
+			data_buf[0] = 9;	/* min length; */
+			data_buf[1] = 0x29;
+			data_buf[2] = temp & RH_A_NDP;
+			data_buf[3] = 0;
+			if (temp & RH_A_PSM)
+				/* per-port power switching? */
+				data_buf[3] |= 0x1;
+			if (temp & RH_A_NOCP)
+				/* no overcurrent reporting? */
+				data_buf[3] |= 0x10;
+			else if (temp & RH_A_OCPM)
+				/* per-port overcurrent reporting? */
+				data_buf[3] |= 0x8;
+
+			/* corresponds to data_buf[4-7] */
+			datab.word[1] = 0;
+			data_buf[5] = (temp & RH_A_POTPGT) >> 24;
+			temp = roothub_b(&gohci);
+			data_buf[7] = temp & RH_B_DR;
+			if (data_buf[2] < 7) {
+				data_buf[8] = 0xff;
+			} else {
+				data_buf[0] += 2;
+				data_buf[8] = (temp & RH_B_DR) >> 8;
+				data_buf[10] = data_buf[9] = 0xff;
+			}
+
+			len = min_t(unsigned int, leni,
+				    min_t(unsigned int, data_buf[0], wLength));
+			OK(len);
+		}
+
+	case RH_GET_CONFIGURATION:
+		*(__u8 *) data_buf = 0x01;
+		OK(1);
+
+	case RH_SET_CONFIGURATION:
+		WR_RH_STAT(0x10000);
+		OK(0);
+
+	default:
+		dbg("unsupported root hub command");
+		stat = USB_ST_STALLED;
+	}
+
+#ifdef	DEBUG
+	ohci_dump_roothub(&gohci, 1);
+#else
+	mdelay(1);
+#endif
+
+	len = min_t(int, len, leni);
+	if (data != data_buf)
+		memcpy(data, data_buf, len);
+	dev->act_len = len;
+	dev->status = stat;
+
+#ifdef DEBUG
+	if (transfer_len)
+		urb_priv.actual_length = transfer_len;
+	pkt_print(dev, pipe, buffer, transfer_len, cmd, "RET(rh)",
+		  0 /*usb_pipein(pipe) */);
+#else
+	mdelay(1);
+#endif
+
+	return stat;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* common code for handling submit messages - used for all but root hub */
+/* accesses. */
+int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+		      int transfer_len, struct devrequest *setup, int interval)
+{
+	int stat = 0;
+	int maxsize = usb_maxpacket(dev, pipe);
+	int timeout;
+
+	/* device pulled? Shortcut the action. */
+	if (devgone == dev) {
+		dev->status = USB_ST_CRC_ERR;
+		return 0;
+	}
+#ifdef DEBUG
+	urb_priv.actual_length = 0;
+	pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB",
+		  usb_pipein(pipe));
+#else
+	mdelay(1);
+#endif
+	if (!maxsize) {
+		err("submit_common_message: pipesize for pipe %lx is zero",
+		    pipe);
+		return -1;
+	}
+
+	if (sohci_submit_job(dev, pipe, buffer, transfer_len, setup, interval) <
+	    0) {
+		err("sohci_submit_job failed");
+		return -1;
+	}
+
+	mdelay(10);
+	/* ohci_dump_status(&gohci); */
+
+	/* allow more time for a BULK device to react - some are slow */
+#define BULK_TO	 5000		/* timeout in milliseconds */
+	if (usb_pipebulk(pipe))
+		timeout = BULK_TO;
+	else
+		timeout = 100;
+
+	/* wait for it to complete */
+	for (;;) {
+		/* check whether the controller is done */
+		stat = hc_interrupt();
+
+		if (stat < 0) {
+			stat = USB_ST_CRC_ERR;
+			break;
+		}
+
+		/* NOTE: since we are not interrupt driven in U-Boot and always
+		 * handle only one URB at a time, we cannot assume the
+		 * transaction finished on the first successful return from
+		 * hc_interrupt().. unless the flag for current URB is set,
+		 * meaning that all TD's to/from device got actually
+		 * transferred and processed. If the current URB is not
+		 * finished we need to re-iterate this loop so as
+		 * hc_interrupt() gets called again as there needs to be some
+		 * more TD's to process still */
+		if ((stat >= 0) && (stat != 0xff) && (urb_finished)) {
+			/* 0xff is returned for an SF-interrupt */
+			break;
+		}
+
+		if (--timeout) {
+			mdelay(1);
+			if (!urb_finished)
+				dbg("\%");
+
+		} else {
+			err("CTL:TIMEOUT ");
+			dbg("submit_common_msg: TO status %x\n", stat);
+			stat = USB_ST_CRC_ERR;
+			urb_finished = 1;
+			break;
+		}
+	}
+
+#if 0
+	/* we got an Root Hub Status Change interrupt */
+	if (got_rhsc) {
+#ifdef DEBUG
+		ohci_dump_roothub(&gohci, 1);
+#endif
+		got_rhsc = 0;
+		/* abuse timeout */
+		timeout = rh_check_port_status(&gohci);
+		if (timeout >= 0) {
+#if 0			/* this does nothing useful, but leave it here
+			   in case that changes */
+			/* the called routine adds 1 to the passed value */
+			usb_hub_port_connect_change(gohci.rh.dev, timeout - 1);
+#endif
+			/*
+			 * XXX
+			 * This is potentially dangerous because it assumes
+			 * that only one device is ever plugged in!
+			 */
+			devgone = dev;
+		}
+	}
+#endif
+
+	dev->status = stat;
+	dev->act_len = transfer_len;
+
+#ifdef DEBUG
+	pkt_print(dev, pipe, buffer, transfer_len, setup, "RET(ctlr)",
+		  usb_pipein(pipe));
+#else
+	mdelay(1);
+#endif
+
+	/* free TDs in urb_priv */
+	urb_free_priv(&urb_priv);
+	return 0;
+}
+
+/* submit routines called from usb.c */
+int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+		    int transfer_len)
+{
+	info("submit_bulk_msg");
+	return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, 0);
+}
+
+int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+		       int transfer_len, struct devrequest *setup)
+{
+	int maxsize = usb_maxpacket(dev, pipe);
+
+	info("submit_control_msg");
+#ifdef DEBUG
+	urb_priv.actual_length = 0;
+	pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB",
+		  usb_pipein(pipe));
+#else
+	mdelay(1);
+#endif
+	if (!maxsize) {
+		err("submit_control_message: pipesize for pipe %lx is zero",
+		    pipe);
+		return -1;
+	}
+	if (((pipe >> 8) & 0x7f) == gohci.rh.devnum) {
+		gohci.rh.dev = dev;
+		/* root hub - redirect */
+		return ohci_submit_rh_msg(dev, pipe, buffer, transfer_len,
+					  setup);
+	}
+
+	return submit_common_msg(dev, pipe, buffer, transfer_len, setup, 0);
+}
+
+int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+		   int transfer_len, int interval)
+{
+	info("submit_int_msg");
+	return -1;
+}
+
+/*-------------------------------------------------------------------------*
+ * HC functions
+ *-------------------------------------------------------------------------*/
+
+/* reset the HC and BUS */
+
+static int hc_reset(struct ohci *ohci)
+{
+	int timeout = 30;
+	int smm_timeout = 50;	/* 0,5 sec */
+
+	if (readl(&ohci->regs->control) & OHCI_CTRL_IR) {
+		/* SMM owns the HC - request ownership */
+		writel(OHCI_OCR, &ohci->regs->cmdstatus);
+		info("USB HC TakeOver from SMM");
+		while (readl(&ohci->regs->control) & OHCI_CTRL_IR) {
+			mdelay(10);
+			if (--smm_timeout == 0) {
+				err("USB HC TakeOver failed!");
+				return -1;
+			}
+		}
+	}
+
+	/* Disable HC interrupts */
+	writel(OHCI_INTR_MIE, &ohci->regs->intrdisable);
+
+	dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;",
+	    ohci->slot_name, readl(&ohci->regs->control));
+
+	/* Reset USB (needed by some controllers) */
+	writel(0, &ohci->regs->control);
+
+	/* HC Reset requires max 10 us delay */
+	writel(OHCI_HCR, &ohci->regs->cmdstatus);
+	while ((readl(&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
+		if (--timeout == 0) {
+			err("USB HC reset timed out!");
+			return -1;
+		}
+		udelay(1);
+	}
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Start an OHCI controller, set the BUS operational
+ * enable interrupts
+ * connect the virtual root hub */
+
+static int hc_start(struct ohci *ohci)
+{
+	__u32 mask;
+	unsigned int fminterval;
+
+	ohci->disabled = 1;
+
+	/* Tell the controller where the control and bulk lists are
+	 * The lists are empty now. */
+
+	writel(0, &ohci->regs->ed_controlhead);
+	writel(0, &ohci->regs->ed_bulkhead);
+
+	/* a reset clears this */
+	writel((__u32) ohci->hcca, &ohci->regs->hcca);
+
+	fminterval = 0x2edf;
+	writel((fminterval * 9) / 10, &ohci->regs->periodicstart);
+	fminterval |= ((((fminterval - 210) * 6) / 7) << 16);
+	writel(fminterval, &ohci->regs->fminterval);
+	writel(0x628, &ohci->regs->lsthresh);
+
+	/* start controller operations */
+	ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER;
+	ohci->disabled = 0;
+	writel(ohci->hc_control, &ohci->regs->control);
+
+	/* disable all interrupts */
+	mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD |
+		OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC |
+		OHCI_INTR_OC | OHCI_INTR_MIE);
+	writel(mask, &ohci->regs->intrdisable);
+	/* clear all interrupts */
+	mask &= ~OHCI_INTR_MIE;
+	writel(mask, &ohci->regs->intrstatus);
+	/* Choose the interrupts we care about now  - but w/o MIE */
+	mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO;
+	writel(mask, &ohci->regs->intrenable);
+
+#ifdef	OHCI_USE_NPS
+	/* required for AMD-756 and some Mac platforms */
+	writel((roothub_a(ohci) | RH_A_NPS) & ~RH_A_PSM,
+	       &ohci->regs->roothub.a);
+	writel(RH_HS_LPSC, &ohci->regs->roothub.status);
+#endif /* OHCI_USE_NPS */
+
+	/* POTPGT delay is bits 24-31, in 2 ms units. */
+	mdelay((roothub_a(ohci) >> 23) & 0x1fe);
+
+	/* connect the virtual root hub */
+	ohci->rh.devnum = 0;
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* an interrupt happens */
+
+static int hc_interrupt(void)
+{
+	struct ohci *ohci = &gohci;
+	struct ohci_regs *regs = ohci->regs;
+	int ints;
+	int stat = -1;
+
+	if ((ohci->hcca->done_head != 0) &&
+	    !(m32_swap(ohci->hcca->done_head) & 0x01)) {
+
+		ints = OHCI_INTR_WDH;
+
+	} else {
+		ints = readl(&regs->intrstatus);
+		if (ints == ~(u32) 0) {
+			ohci->disabled++;
+			err("%s device removed!", ohci->slot_name);
+			return -1;
+		}
+		ints &= readl(&regs->intrenable);
+		if (ints == 0) {
+			dbg("hc_interrupt: returning..\n");
+			return 0xff;
+		}
+	}
+
+	/* dbg("Interrupt: %x frame: %x", ints,
+	    le16_to_cpu(ohci->hcca->frame_no)); */
+
+	if (ints & OHCI_INTR_RHSC) {
+		got_rhsc = 1;
+		stat = 0xff;
+	}
+
+	if (ints & OHCI_INTR_UE) {
+		ohci->disabled++;
+		err("OHCI Unrecoverable Error, controller usb-%s disabled",
+		    ohci->slot_name);
+		/* e.g. due to PCI Master/Target Abort */
+
+#ifdef	DEBUG
+		ohci_dump(ohci, 1);
+#else
+		mdelay(1);
+#endif
+		/* FIXME: be optimistic, hope that bug won't repeat often. */
+		/* Make some non-interrupt context restart the controller. */
+		/* Count and limit the retries though; either hardware or */
+		/* software errors can go forever... */
+		hc_reset(ohci);
+		return -1;
+	}
+
+	if (ints & OHCI_INTR_WDH) {
+		mdelay(1);
+
+		writel(OHCI_INTR_WDH, &regs->intrdisable);
+		stat = dl_done_list(&gohci, dl_reverse_done_list(&gohci));
+		writel(OHCI_INTR_WDH, &regs->intrenable);
+	}
+
+	if (ints & OHCI_INTR_SO) {
+		dbg("USB Schedule overrun\n");
+		writel(OHCI_INTR_SO, &regs->intrenable);
+		stat = -1;
+	}
+
+	/* FIXME:  this assumes SOF (1/ms) interrupts don't get lost... */
+	if (ints & OHCI_INTR_SF) {
+		unsigned int frame = m16_swap(ohci->hcca->frame_no) & 1;
+		mdelay(1);
+		writel(OHCI_INTR_SF, &regs->intrdisable);
+		if (ohci->ed_rm_list[frame] != NULL)
+			writel(OHCI_INTR_SF, &regs->intrenable);
+		stat = 0xff;
+	}
+
+	writel(ints, &regs->intrstatus);
+	return stat;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*-------------------------------------------------------------------------*/
+
+/* De-allocate all resources.. */
+
+static void hc_release_ohci(struct ohci *ohci)
+{
+	dbg("USB HC release ohci usb-%s", ohci->slot_name);
+
+	if (!ohci->disabled)
+		hc_reset(ohci);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * low level initalisation routine, called from usb.c
+ */
+static char ohci_inited = 0;
+
+int usb_lowlevel_init(int index, void **controller)
+{
+	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
+	struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
+
+	/*
+	 * Set the 48 MHz UPLL clocking. Values are taken from
+	 * "PLL value selection guide", 6-23, s3c2400_UM.pdf.
+	 */
+	clk_power->upllcon = ((40 << 12) + (1 << 4) + 2);
+	gpio->misccr |= 0x8;	/* 1 = use pads related USB for USB host */
+
+	/*
+	 * Enable USB host clock.
+	 */
+	clk_power->clkcon |= (1 << 4);
+
+	memset(&gohci, 0, sizeof(struct ohci));
+	memset(&urb_priv, 0, sizeof(struct urb_priv));
+
+	/* align the storage */
+	if ((__u32) &ghcca[0] & 0xff) {
+		err("HCCA not aligned!!");
+		return -1;
+	}
+	phcca = &ghcca[0];
+	info("aligned ghcca %p", phcca);
+	memset(&ohci_dev, 0, sizeof(struct ohci_device));
+	if ((__u32) &ohci_dev.ed[0] & 0x7) {
+		err("EDs not aligned!!");
+		return -1;
+	}
+	memset(gtd, 0, sizeof(struct td) * (NUM_TD + 1));
+	if ((__u32) gtd & 0x7) {
+		err("TDs not aligned!!");
+		return -1;
+	}
+	ptd = gtd;
+	gohci.hcca = phcca;
+	memset(phcca, 0, sizeof(struct ohci_hcca));
+
+	gohci.disabled = 1;
+	gohci.sleeping = 0;
+	gohci.irq = -1;
+	gohci.regs = (struct ohci_regs *)S3C24X0_USB_HOST_BASE;
+
+	gohci.flags = 0;
+	gohci.slot_name = "s3c2400";
+
+	if (hc_reset(&gohci) < 0) {
+		hc_release_ohci(&gohci);
+		/* Initialization failed */
+		clk_power->clkcon &= ~(1 << 4);
+		return -1;
+	}
+
+	/* FIXME this is a second HC reset; why?? */
+	gohci.hc_control = OHCI_USB_RESET;
+	writel(gohci.hc_control, &gohci.regs->control);
+	mdelay(10);
+
+	if (hc_start(&gohci) < 0) {
+		err("can't start usb-%s", gohci.slot_name);
+		hc_release_ohci(&gohci);
+		/* Initialization failed */
+		clk_power->clkcon &= ~(1 << 4);
+		return -1;
+	}
+#ifdef	DEBUG
+	ohci_dump(&gohci, 1);
+#else
+	mdelay(1);
+#endif
+	ohci_inited = 1;
+	urb_finished = 1;
+
+	return 0;
+}
+
+int usb_lowlevel_stop(int index)
+{
+	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
+
+	/* this gets called really early - before the controller has */
+	/* even been initialized! */
+	if (!ohci_inited)
+		return 0;
+	/* TODO release any interrupts, etc. */
+	/* call hc_release_ohci() here ? */
+	hc_reset(&gohci);
+	/* may not want to do this */
+	clk_power->clkcon &= ~(1 << 4);
+	return 0;
+}
+
+#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_S3C24X0) */
+
+#if defined(CONFIG_USB_OHCI_NEW) && \
+    defined(CONFIG_SYS_USB_OHCI_CPU_INIT) && \
+    defined(CONFIG_S3C24X0)
+
+int usb_cpu_init(void)
+{
+	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
+	struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
+
+	/*
+	 * Set the 48 MHz UPLL clocking. Values are taken from
+	 * "PLL value selection guide", 6-23, s3c2400_UM.pdf.
+	 */
+	writel((40 << 12) + (1 << 4) + 2, &clk_power->upllcon);
+	/* 1 = use pads related USB for USB host */
+	writel(readl(&gpio->misccr) | 0x8, &gpio->misccr);
+
+	/*
+	 * Enable USB host clock.
+	 */
+	writel(readl(&clk_power->clkcon) | (1 << 4), &clk_power->clkcon);
+
+	return 0;
+}
+
+int usb_cpu_stop(void)
+{
+	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
+	/* may not want to do this */
+	writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon);
+	return 0;
+}
+
+int usb_cpu_init_fail(void)
+{
+	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
+	writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon);
+	return 0;
+}
+
+#endif /* defined(CONFIG_USB_OHCI_NEW) && \
+	   defined(CONFIG_SYS_USB_OHCI_CPU_INIT) && \
+	   defined(CONFIG_S3C24X0) */
diff --git a/drivers/usb/host/ohci-s3c24xx.h b/drivers/usb/host/ohci-s3c24xx.h
new file mode 100644
index 0000000..f272d78
--- /dev/null
+++ b/drivers/usb/host/ohci-s3c24xx.h
@@ -0,0 +1,409 @@
+/*
+ * URB OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2001 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ * usb-ohci.h
+ */
+
+
+static int cc_to_error[16] = {
+
+/* mapping of the OHCI CC status to error codes */
+	/* No  Error  */ 0,
+	/* CRC Error  */ USB_ST_CRC_ERR,
+	/* Bit Stuff  */ USB_ST_BIT_ERR,
+	/* Data Togg  */ USB_ST_CRC_ERR,
+	/* Stall      */ USB_ST_STALLED,
+	/* DevNotResp */ -1,
+	/* PIDCheck   */ USB_ST_BIT_ERR,
+	/* UnExpPID   */ USB_ST_BIT_ERR,
+	/* DataOver   */ USB_ST_BUF_ERR,
+	/* DataUnder  */ USB_ST_BUF_ERR,
+	/* reservd    */ -1,
+	/* reservd    */ -1,
+	/* BufferOver */ USB_ST_BUF_ERR,
+	/* BuffUnder  */ USB_ST_BUF_ERR,
+	/* Not Access */ -1,
+	/* Not Access */ -1
+};
+
+/* ED States */
+#define ED_NEW		0x00
+#define ED_UNLINK	0x01
+#define ED_OPER		0x02
+#define ED_DEL		0x04
+#define ED_URB_DEL	0x08
+
+/* usb_ohci_ed */
+struct ed {
+	__u32 hwINFO;
+	__u32 hwTailP;
+	__u32 hwHeadP;
+	__u32 hwNextED;
+
+	struct ed *ed_prev;
+	__u8 int_period;
+	__u8 int_branch;
+	__u8 int_load;
+	__u8 int_interval;
+	__u8 state;
+	__u8 type;
+	__u16 last_iso;
+	struct ed *ed_rm_list;
+
+	struct usb_device *usb_dev;
+	__u32 unused[3];
+} __attribute__ ((aligned(16)));
+
+/* TD info field */
+#define TD_CC			0xf0000000
+#define TD_CC_GET(td_p)		(((td_p) >> 28) & 0x0f)
+#define TD_CC_SET(td_p, cc) \
+	{(td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)}
+#define TD_EC			0x0C000000
+#define TD_T			0x03000000
+#define TD_T_DATA0		0x02000000
+#define TD_T_DATA1		0x03000000
+#define TD_T_TOGGLE		0x00000000
+#define TD_R			0x00040000
+#define TD_DI			0x00E00000
+#define TD_DI_SET(X)		(((X) & 0x07)<< 21)
+#define TD_DP			0x00180000
+#define TD_DP_SETUP		0x00000000
+#define TD_DP_IN		0x00100000
+#define TD_DP_OUT		0x00080000
+
+#define TD_ISO			0x00010000
+#define TD_DEL			0x00020000
+
+/* CC Codes */
+#define TD_CC_NOERROR		0x00
+#define TD_CC_CRC		0x01
+#define TD_CC_BITSTUFFING	0x02
+#define TD_CC_DATATOGGLEM	0x03
+#define TD_CC_STALL		0x04
+#define TD_DEVNOTRESP		0x05
+#define TD_PIDCHECKFAIL	0x06
+#define TD_UNEXPECTEDPID	0x07
+#define TD_DATAOVERRUN		0x08
+#define TD_DATAUNDERRUN	0x09
+#define TD_BUFFEROVERRUN	0x0C
+#define TD_BUFFERUNDERRUN	0x0D
+#define TD_NOTACCESSED		0x0F
+
+
+#define MAXPSW 1
+
+struct td {
+	__u32 hwINFO;
+	__u32 hwCBP;		/* Current Buffer Pointer */
+	__u32 hwNextTD;		/* Next TD Pointer */
+	__u32 hwBE;		/* Memory Buffer End Pointer */
+
+	__u8 unused;
+	__u8 index;
+	struct ed *ed;
+	struct td *next_dl_td;
+	struct usb_device *usb_dev;
+	int transfer_len;
+	__u32 data;
+
+	__u32 unused2[2];
+} __attribute__ ((aligned(32)));
+
+#define OHCI_ED_SKIP	(1 << 14)
+
+/*
+ * The HCCA (Host Controller Communications Area) is a 256 byte
+ * structure defined in the OHCI spec. that the host controller is
+ * told the base address of.  It must be 256-byte aligned.
+ */
+
+#define NUM_INTS 32		/* part of the OHCI standard */
+struct ohci_hcca {
+	__u32 int_table[NUM_INTS];	/* Interrupt ED table */
+	__u16 frame_no;		/* current frame number */
+	__u16 pad1;		/* set to 0 on each frame_no change */
+	__u32 done_head;	/* info returned for an interrupt */
+	u8 reserved_for_hc[116];
+} __attribute__ ((aligned(256)));
+
+/*
+ * Maximum number of root hub ports.
+ */
+#define MAX_ROOT_PORTS	15	/* maximum OHCI root hub ports */
+
+/*
+ * This is the structure of the OHCI controller's memory mapped I/O
+ * region.  This is Memory Mapped I/O.	You must use the readl() and
+ * writel() macros defined in asm/io.h to access these!!
+ */
+struct ohci_regs {
+	/* control and status registers */
+	__u32 revision;
+	__u32 control;
+	__u32 cmdstatus;
+	__u32 intrstatus;
+	__u32 intrenable;
+	__u32 intrdisable;
+	/* memory pointers */
+	__u32 hcca;
+	__u32 ed_periodcurrent;
+	__u32 ed_controlhead;
+	__u32 ed_controlcurrent;
+	__u32 ed_bulkhead;
+	__u32 ed_bulkcurrent;
+	__u32 donehead;
+	/* frame counters */
+	__u32 fminterval;
+	__u32 fmremaining;
+	__u32 fmnumber;
+	__u32 periodicstart;
+	__u32 lsthresh;
+	/* Root hub ports */
+	struct ohci_roothub_regs {
+		__u32 a;
+		__u32 b;
+		__u32 status;
+		__u32 portstatus[MAX_ROOT_PORTS];
+	} roothub;
+} __attribute__ ((aligned(32)));
+
+/* OHCI CONTROL AND STATUS REGISTER MASKS */
+
+/*
+ * HcControl (control) register masks
+ */
+#define OHCI_CTRL_CBSR	(3 << 0)	/* control/bulk service ratio */
+#define OHCI_CTRL_PLE	(1 << 2)	/* periodic list enable */
+#define OHCI_CTRL_IE	(1 << 3)	/* isochronous enable */
+#define OHCI_CTRL_CLE	(1 << 4)	/* control list enable */
+#define OHCI_CTRL_BLE	(1 << 5)	/* bulk list enable */
+#define OHCI_CTRL_HCFS	(3 << 6)	/* host controller functional state */
+#define OHCI_CTRL_IR	(1 << 8)	/* interrupt routing */
+#define OHCI_CTRL_RWC	(1 << 9)	/* remote wakeup connected */
+#define OHCI_CTRL_RWE	(1 << 10)	/* remote wakeup enable */
+
+/* pre-shifted values for HCFS */
+#	define OHCI_USB_RESET	(0 << 6)
+#	define OHCI_USB_RESUME	(1 << 6)
+#	define OHCI_USB_OPER	(2 << 6)
+#	define OHCI_USB_SUSPEND	(3 << 6)
+
+/*
+ * HcCommandStatus (cmdstatus) register masks
+ */
+#define OHCI_HCR	(1 << 0)	/* host controller reset */
+#define OHCI_CLF	(1 << 1)	/* control list filled */
+#define OHCI_BLF	(1 << 2)	/* bulk list filled */
+#define OHCI_OCR	(1 << 3)	/* ownership change request */
+#define OHCI_SOC	(3 << 16)	/* scheduling overrun count */
+
+/*
+ * masks used with interrupt registers:
+ * HcInterruptStatus (intrstatus)
+ * HcInterruptEnable (intrenable)
+ * HcInterruptDisable (intrdisable)
+ */
+#define OHCI_INTR_SO	(1 << 0)	/* scheduling overrun */
+#define OHCI_INTR_WDH	(1 << 1)	/* writeback of done_head */
+#define OHCI_INTR_SF	(1 << 2)	/* start frame */
+#define OHCI_INTR_RD	(1 << 3)	/* resume detect */
+#define OHCI_INTR_UE	(1 << 4)	/* unrecoverable error */
+#define OHCI_INTR_FNO	(1 << 5)	/* frame number overflow */
+#define OHCI_INTR_RHSC	(1 << 6)	/* root hub status change */
+#define OHCI_INTR_OC	(1 << 30)	/* ownership change */
+#define OHCI_INTR_MIE	(1 << 31)	/* master interrupt enable */
+
+/* Virtual Root HUB */
+struct virt_root_hub {
+	int devnum;		/* Address of Root Hub endpoint */
+	void *dev;		/* was urb */
+	void *int_addr;
+	int send;
+	int interval;
+};
+
+/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */
+
+/* destination of request */
+#define RH_INTERFACE		0x01
+#define RH_ENDPOINT		0x02
+#define RH_OTHER		0x03
+
+#define RH_CLASS		0x20
+#define RH_VENDOR		0x40
+
+/* Requests: bRequest << 8 | bmRequestType */
+#define RH_GET_STATUS		0x0080
+#define RH_CLEAR_FEATURE	0x0100
+#define RH_SET_FEATURE		0x0300
+#define RH_SET_ADDRESS		0x0500
+#define RH_GET_DESCRIPTOR	0x0680
+#define RH_SET_DESCRIPTOR	0x0700
+#define RH_GET_CONFIGURATION	0x0880
+#define RH_SET_CONFIGURATION	0x0900
+#define RH_GET_STATE		0x0280
+#define RH_GET_INTERFACE	0x0A80
+#define RH_SET_INTERFACE	0x0B00
+#define RH_SYNC_FRAME		0x0C80
+/* Our Vendor Specific Request */
+#define RH_SET_EP		0x2000
+
+
+/* Hub port features */
+#define RH_PORT_CONNECTION	0x00
+#define RH_PORT_ENABLE		0x01
+#define RH_PORT_SUSPEND		0x02
+#define RH_PORT_OVER_CURRENT	0x03
+#define RH_PORT_RESET		0x04
+#define RH_PORT_POWER		0x08
+#define RH_PORT_LOW_SPEED	0x09
+
+#define RH_C_PORT_CONNECTION	0x10
+#define RH_C_PORT_ENABLE	0x11
+#define RH_C_PORT_SUSPEND	0x12
+#define RH_C_PORT_OVER_CURRENT	0x13
+#define RH_C_PORT_RESET		0x14
+
+/* Hub features */
+#define RH_C_HUB_LOCAL_POWER	0x00
+#define RH_C_HUB_OVER_CURRENT	0x01
+
+#define RH_DEVICE_REMOTE_WAKEUP 0x00
+#define RH_ENDPOINT_STALL	0x01
+
+#define RH_ACK			0x01
+#define RH_REQ_ERR		-1
+#define RH_NACK			0x00
+
+
+/* OHCI ROOT HUB REGISTER MASKS */
+
+/* roothub.portstatus [i] bits */
+#define RH_PS_CCS		0x00000001 /* current connect status */
+#define RH_PS_PES		0x00000002 /* port enable status */
+#define RH_PS_PSS		0x00000004 /* port suspend status */
+#define RH_PS_POCI		0x00000008 /* port over current indicator */
+#define RH_PS_PRS		0x00000010 /* port reset status */
+#define RH_PS_PPS		0x00000100 /* port power status */
+#define RH_PS_LSDA		0x00000200 /* low speed device attached */
+#define RH_PS_CSC		0x00010000 /* connect status change */
+#define RH_PS_PESC		0x00020000 /* port enable status change */
+#define RH_PS_PSSC		0x00040000 /* port suspend status change */
+#define RH_PS_OCIC		0x00080000 /* over current indicator change */
+#define RH_PS_PRSC		0x00100000 /* port reset status change */
+
+/* roothub.status bits */
+#define RH_HS_LPS		0x00000001 /* local power status */
+#define RH_HS_OCI		0x00000002 /* over current indicator */
+#define RH_HS_DRWE		0x00008000 /* device remote wakeup enable */
+#define RH_HS_LPSC		0x00010000 /* local power status change */
+#define RH_HS_OCIC		0x00020000 /* over current indicator change */
+#define RH_HS_CRWE		0x80000000 /* clear remote wakeup enable */
+
+/* roothub.b masks */
+#define RH_B_DR			0x0000ffff /* device removable flags */
+#define RH_B_PPCM		0xffff0000 /* port power control mask */
+
+/* roothub.a masks */
+#define	RH_A_NDP		(0xff << 0)  /* number of downstream ports */
+#define	RH_A_PSM		(1 << 8)     /* power switching mode */
+#define	RH_A_NPS		(1 << 9)     /* no power switching */
+#define	RH_A_DT			(1 << 10)    /* device type (mbz) */
+#define	RH_A_OCPM		(1 << 11)    /* over current protection mode */
+#define	RH_A_NOCP		(1 << 12)    /* no over current protection */
+#define	RH_A_POTPGT		(0xff << 24) /* power on to power good time */
+
+/* urb */
+#define N_URB_TD 48
+struct urb_priv {
+	struct ed *ed;
+	__u16 length;		/* number of tds associated with this request */
+	__u16 td_cnt;		/* number of tds already serviced */
+	int state;
+	unsigned long pipe;
+	int actual_length;
+	struct td *td[N_URB_TD];	/* list pointer to all corresponding TDs
+					   associated with this request */
+};
+#define URB_DEL 1
+
+/*
+ * This is the full ohci controller description
+ *
+ * Note how the "proper" USB information is just
+ * a subset of what the full implementation needs. (Linus)
+ */
+
+
+struct ohci {
+	struct ohci_hcca *hcca;	/* hcca */
+	/*dma_addr_t hcca_dma; */
+
+	int irq;
+	int disabled;		/* e.g. got a UE, we're hung */
+	int sleeping;
+	unsigned long flags;	/* for HC bugs */
+
+	struct ohci_regs *regs;	/* OHCI controller's memory */
+
+	struct ed *ed_rm_list[2];  /* lists of all endpoints to be removed */
+	struct ed *ed_bulktail;    /* last endpoint of bulk list */
+	struct ed *ed_controltail; /* last endpoint of control list */
+	int intrstatus;
+	__u32 hc_control;	/* copy of the hc control reg */
+	struct usb_device *dev[32];
+	struct virt_root_hub rh;
+
+	const char *slot_name;
+};
+
+#define NUM_EDS 8		/* num of preallocated endpoint descriptors */
+
+struct ohci_device {
+	struct ed ed[NUM_EDS];
+	int ed_cnt;
+};
+
+/* hcd */
+/* endpoint */
+static int ep_link(struct ohci *ohci, struct ed *ed);
+static int ep_unlink(struct ohci *ohci, struct ed *ed);
+static struct ed *ep_add_ed(struct usb_device *usb_dev, unsigned long pipe);
+
+/*-------------------------------------------------------------------------*/
+
+/* we need more TDs than EDs */
+#define NUM_TD 64
+
+/* +1 so we can align the storage */
+struct td gtd[NUM_TD + 1];
+
+/* pointers to aligned storage */
+struct td *ptd;
+
+/* TDs ... */
+static inline struct td *td_alloc(struct usb_device *usb_dev)
+{
+	int i;
+	struct td *td;
+
+	td = NULL;
+	for (i = 0; i < NUM_TD; i++) {
+		if (ptd[i].usb_dev == NULL) {
+			td = &ptd[i];
+			td->usb_dev = usb_dev;
+			break;
+		}
+	}
+
+	return td;
+}
+
+static inline void ed_free(struct ed *ed)
+{
+	ed->usb_dev = NULL;
+}